Description

911 Motorsports Expand your floor jack's capability and save $$$ with the Round Saddle Extension and Big Flat Plate combo . Use the 6" Floor Jack Extension with Round Saddle to safely lift taller vehicles and then c onvert your floor jack into a flat lifter for large, heavy parts. Install the included Adapter Pin in place of the saddle on your floor jack and use the 6" Extension with the Round Saddle to safely put your truck or SUV up on jack stands for service. Then use the 8"x10" Big Flat Plate to give you low profile (adds 2" to your jack) flat area to lift or lower heavy parts for removal or re-installation. The BFP has holes on the corners and support gussets for strap hooks to help secure the load. You can also put the Round Saddle on the Adapter Pin without the Extension for lifting cars or put the Big Flat Plate and Extension on the Adapter Pin and you have a low-budget motorcycle lift. Good for automatic transmissions, fuel tanks and more. Jack NOT included ! Adapter Pins to fit most 1½ to 4 ton floor jacks, check the chart!!! Confirm your Floor Jack Saddle Mount style: Fine Thread - Most common on 2-4 ton jacks, comes with large washer for jacks with a lip around the threads Coarse Thread - Used on Duralast, Torin and potentially other brand jacks Cross Pin - Fits most 1½ ton jacks that use a cross pin to retain the saddle Drop in pin - Fits older style jacks with 1.17" or 1 3/16" saddle post Kit includes: 1 1/2" Adapter Pin - machined 1018 steel, zinc-plated (make sure you pick the right one for your jack) 6" Extension tube - 1.5" dia. x .120"-wall DOM tube with a pressed-in stop collar, zinc-plated Round Saddle - laser cut, formed & welded 1/4" A572 steel, zinc-plated 3 1/4" Saddle Pad - Prothane polyurethane Big Flat Plate - 1/8" thick HRPO steel with support gussets and DOM receiver tube